In the synchronous belt drive, in order to prevent the deviation caused by the non parallel axis of the synchronous belt pulley, it is usually necessary to set a retaining ring on one side (or both sides) of the pulley. The retaining ring can be firmly connected to the side of the synchronous belt pulley through screws. At this time, corresponding through holes and threaded holes need to be made on the retaining ring and belt pulley and assembled. The process is complex and the cost is high;
If it is not suitable to use screws and other fasteners for connection due to the limitation of the structural size of the synchronous pulley, riveting, spot welding and other methods can also be used to connect the pulley and the retaining ring. At this time, riveting or welding equipment is required, which has low processing efficiency, poor reliability and uneven appearance of the pulley.
Embodiment of the use value of synchronous belt pulley
In many industries, it will be found that the synchronous belt wheel is a very good method and project. This synchronous belt wheel refers to the operation of the wheel made of those metal materials in the two belts according to its inside. This operation will be judged according to the size and diameter of the wheel, as well as the material and what it bears. In this way, safety will be noticed when the timing belt pulley is. Its rotation is carried out through the wheel, and if there is a problem with the wheel, it will not rotate, which will lead to a stop in some place, which will be dangerous. Therefore, it is necessary to maintain and check it at all times every day. You can try it before work, operate it, and then apply some lubricating oil to reduce friction and make it run more fluently. This will be a good performance. Nowadays, it is used too often in the construction industry. It can help people carry out high-altitude transportation, which is the embodiment of its use value.
