Maintenance of synchronous pulley
(1) The drive belt should not be twisted or sharply bent.
(2) Avoid direct sunlight, rain and snow during storage and transportation; Prevent contact with acid, halogen, organic solvent, water vapor and other substances affecting the product;
(3) Store at normal temperature, generally - 20-50; And at least one meter away from the heat source.
(4) During storage, it is necessary to prevent deformation due to excessive weight. It is not allowed to fold and stack. It is not allowed to put the belt directly on the ground. The belt should be hung on the shelf or placed flat on the shelf.
(5) The finished synchronous pulley shall be stored and transported in a dry and ventilated environment, and the finished pulley shall be subject to rust prevention treatment.
(6) The belt transmission device shall be equipped with protective cover and ensure ventilation and sewage discharge.
